Maricopa, Arizona Plumbing Local Permit Ordinances and Codes
City Building Department (Authority Having Jurisdiction)
The City of Maricopa's Development Services Department, specifically the Building Safety division, is the Authority Having Jurisdiction (AHJ) for plumbing permits and related construction within the city limits. They administer Maricopa's adopted building, plumbing, mechanical, and electrical codes.
Local Zoning or Fee Nuances
The City of Maricopa has adopted the 2024 International Plumbing Code, with an effective date of February 20, 2026. All permit applications and plan reviews are now conducted digitally through the VIP Portal. While specific local zoning nuances for plumbing permits are not detailed, general zoning permit fees are charged at an hourly rate of $112 for review, with an average review taking 1-2 hours. For building permits, a fee schedule is available, and fees are collected upon permit approval.
For unincorporated areas of Maricopa County, the Maricopa County Building Permits division handles permit procedures. Trade permits, including plumbing, are required for new installations, major repairs, or system expansions in both residential and commercial projects within the county. Maricopa County also has a fee schedule for various services, including plan reviews and inspections, with expedited services available at double the standard fee.
Resources to Learn More
Because Maricopa is located within Pinal County, the following broader county regulations may also apply to your project:
Arizona, Pinal County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Pinal County Plumbing Permit Requirements
Pinal County requires permits for any new additions, alterations, or repairs to mechanical, plumbing, or electrical services. This applies to properties within the unincorporated areas of the county. The Pinal County Building Safety Division is responsible for issuing these permits and conducting inspections.
For properties in unincorporated areas, the Pinal County Building Safety Department provides inspection, plan review, and investigative services. It is important to note that even if construction itself does not require a building permit, an electrical, plumbing, or mechanical permit may still be necessary.
To apply for a plumbing permit, you will need to submit a completed Mechanical, Plumbing, and Electrical (MPE) application. Depending on the project, you may also need to provide site plans detailing the proposed work. All work must comply with the currently adopted codes, including the 2018 International Plumbing Code (IPC).
If you are planning a project that involves gas lines, you must include a site plan showing the placement of the gas line, including the BTU's, length of run, and pipe size/type. For electrical permits, a site plan indicating the location of new panels or upgrades is also required.
Inspections are scheduled by calling a specific inspection line the day before the inspection is needed. Approved plans and the permit must be posted on the day of the inspection. Additionally, addresses must be clearly visible from the street for inspections to be performed.
If electrical or gas service has been disconnected for more than six months, a permit will be required. For services disconnected for less than six months, a one-time courtesy inspection may be performed if no work has been done.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Arizona:
Arizona Plumbing Legislation, Codes, and Guidelines
Plumbing Code Adoption in Arizona
Arizona does not have a single, mandatory statewide plumbing code. Historically, legislation was enacted to create a state-level commission and mandate a uniform code, but those provisions were subsequently repealed. Consequently, the adoption and enforcement of plumbing standards are delegated to local jurisdictions, such as cities, towns, and counties.
Because there is no statewide mandate, local municipalities have the authority to adopt and amend their own plumbing regulations. Many jurisdictions in Arizona choose to base their local codes on nationally recognized model codes, most commonly the International Plumbing Code (IPC) or the Uniform Plumbing Code (UPC). Because these codes are adopted at the local level, the specific edition (e.g., 2018, 2021, or 2024) and any local amendments can vary significantly from one city or county to another.
Regulatory Oversight and Licensing
While the adoption of technical plumbing codes is local, the regulation of plumbing contractors is handled at the state level by the Arizona Registrar of Contractors (ROC). The ROC is responsible for licensing and regulating contractors to ensure they meet professional standards. While the ROC does not dictate the specific technical plumbing code used by a city, licensed contractors are required to adhere to the codes and ordinances adopted by the local jurisdiction where the work is being performed.
Resources to Learn More